Turbine Outlet Steam Pressure – Atmospheric (14.7 psia) Let us call this Example 1. The steam tables show that the enthalpy of the turbine inlet steam is 1,505.9 Btu per pound of fluid (Btu/lbm).

How Impurities, Even at Trace Levels, Can Damage the Turbine. Power-generating steam turbines are typically divided into three sections, high-pressure (HP), intermediate pressure (IP), and low ...

Steam turbines have helped drive a large chunk of our technological development over the last century or so, and they’ll always make for interesting DIY. [Hyperspace Pirate] built a small tur… ...

The ability of the steam cycle elements of HRSG, power piping, steam turbine generator, and condenser to function reliably at lower GT loads is essential to effective low-load operation. HRSGs ...

The 1,150-MW steam turbine is a General Electric cross-compound design whose high-pressure (HP) and first reheat (IP1) turbine section are coupled to a 3,600-rpm generator.

Fuji Electric's 125MW steam turbine was installed as part of the Green Electron Power Project in Ontario, Canada. The plant aims to improve air qualit ...

In a plant where low-pressure steam is currently being exhausted to the atmosphere, a mechanical chiller with a COP of 4.0 is used 4,000 hours per year (hr/yr) to produce an average of 300 tons of ...

To-day single turbo-generators of 100,000 kw. capacity are in use, and the present estimated value of Parsons turbines alone is £152,000,000, the figures for marine and land turbines being £ ...

The engine achieves maximum efficiencies at 600 °F (316 °C) and steam pressure of 200 psi (1.4 MPa), at which point one Waste Heat Engine can generate 16 hp (12 kW), 30 lb-ft (41 Nm) of torque ...

GE is a world leader in the development and application of steam turbine technology, with more than 530 GW of steam turbine capacity from more than 6,000 installed units.